Details
Vehicle Loop Detector, Single Channel Loop Detector PD132 Car Detector Car Parking Lot Inductive Vehicle Detector

✱ 【Reset Switch】: The reset switch enables the detector to be manually reset during commissioning and testing. These results in the detector re-tuning the sensing loop and becoming ready for vehicle detection
✱ 【Pulse Relay Selection】: The Pulse Relay may be configured to energize on detection of a vehicle or when the vehicle leaves the loop
✱ 【Sensitivity Boost】: This feature sets the undetected level to maximum sensitivity and is used to prevent loss of detection of high-bed vehicles
✱ 【Frequency】: 4 frequency settings are available to prevent cross-talk between adjacent loop
✱ 【Filter Option】: This option is used to provide a delay between detection of the vehicle and switching of the output relay.
Features:

Reset Switch: The reset switch enables the detector to be manually reset during commissioning and testing. This results in the detector re-tuning the sensing loop and becoming ready for vehicle detection

Pulse Relay Selection: The Pulse Relay may be configured to energize on detection of a vehicle or when the vehicle leaves the loop

Sensitivity Boost : This feature sets the undetected level to maximum sensitivity and is used  to prevent loss of detection of high-bed vehicles

Frequency: 4 frequency settings are available to prevent cross-talk between adjacent loops

Filter Option: This option is used to provide a delay between detection of the vehicle and switching of the output relay .

Permanent Presence Option : This feature ensure detection of the vehicle will be maintained when the vehicle is parked over the loop for extended periods .


Specifications:

Supply voltage：220VAC
Power：4.5VA
Output relays：240V/5A
Operating temperature：-20~65°C
Storage temperature：-40~85°C
Frequency range：20 kHz to 170 kHz
Temperature compensation：50°C/ h
Reaction time：10ms
Signal holding time：Unlimited/limited
Sensitivity：
Higher : 0.02%  high：0.05%
low：0.1%    lower：0.5%
Loop inductance
Total loop plus connection wiring:
50μH to 1000μH. Ideal is 100μH to 300μH
Loop connection wiring：200 meters long.
The total resistance is less than 80hm, twisted at least 20 times per meter
Relative humidity：<90%No condensation
Weight：283g


Package included:

1 × Vehicle Loop Detector
1 × manual