Details
SOFIALXC Carbon Graphite Felt High Temp Welding Protective Blanket-Thick 3mmx100x100mm

✔ There are 6 sizes to choose from: thickness: 2mm, 3mm, 5mm, 8mm, 10mm, 13mm, length 100mm, width 100mm.
✔ A blanket-like carbon felt made by pre-oxidation and carbonization of a polyacrylonitrile-based flat felt
✔ Soft texture, light weight, small heat, good heat insulation, easy to cut, easy to operate
✔ Corrosion resistance, high temperature density and high leakage，High life and energy saving
✔ Used in vacuum furnace, induction furnace thermal insulation energy storage battery, experimental conductive electrode gas adsorption material, filtering and removing stains
Parameter:

Size: 100*100mm
Thickness: 2mm,3mm,5mm,8mm,10mm,13mm

Technical indicators:
Carbon content: 98% or more
Moisture absorption rate: 2%
Use environment: air 350 ° C
Vacuum 1800 ° C
Inert gas 2650 ° C
Specific resistance: (Ω.mm2/m)
Horizontal: 8.2-11.1x10 cubic
Vertical: 11.8-16.8X10 cubic

Application :
1. Can be used as a flame retardant material in the thermal insulation industry;
2. As a porous material, it can be used as a catalyst carrier in the chemical industry;
3. Can be used as a corrosion-resistant material for the inner liner or outer protective layer of composite materials.
4. It can be widely used as a conductive, absorbing and absorbing material in aviation, batteries, electrodes (such as electrode tubes, electrode rods, etc.); currently, applications related to conductive concrete are also rapidly developing.


List:
4* Graphite felt

Note:
1. When the temperature exceeds 300 °C, it must be used under vacuum or under the protection of inert gas. It cannot be stressed during transportation and storage, and it needs to be protected from moisture.
2. Please allow 1-2cm error due to manual measurement and make sure you don't mind before ordering.