Details
PART AND TOOL, LLC Fuel Injector Puller for Cummins Diesel Engine Dodge Ram 89-93 94-98 12V

Pulls Injectors from Cummins Engines with both VE and P-Pump
Fits Dodge Ram Diesel Trucks from 1989-1993 & 1994-1998
Remove injector hold down nut, slide down tube, slide down washer, and tighten nut with matching thread to your injector. Injector will come out of bore and can be removed.
NOTE: there has been some confusion regarding the correct usage of this puller. Reviewers that mention the tube not fitting are attempting to put the tube over the injector hold down nut. This is incorrect. The injector hold down nut is loosened and removed, then the puller tube will slide down all 89-98 B-series Cummins 12 valve or 8 valve 4BT injectors. Simply remove the injector nut, slide the tube down, place the washer, and tighten the nut to pull. Once the injector moves out of the bore you can pull it out. We suggest using Kroil around the injectors as it will get into the tightest spots and allow for a smoother pull.