Details
Mean Well ELN-60-12 60W 12V 5A Power Supply LED Driver Water & Dust-proof

Features:
Universal AC input / Full range
Protections:Short circuit / Over current / Over voltage
Cooling by free air convection
Built-in constant current limiting curcuit with adjustable OCP level
Optional dimming function : 1 ~ 10V DC (D type) or PWM (P type) controlled
Fully isolated plastic case with IP64 level
Class II power unit, no FG
Class 2 power unit
Pass LPS
Suitable for LED lighting and moving sign applications (Note. 9)
100% full load burn-in test
Low cost, high reliability

Specification:
MODEL:ELN-60-12
DC VOLTAGE:12V
CONSTANT CURRENT OPERATION VOLTAGE:6 ~ 12V
CURRENT RANGE:0 ~ 5A
RATED CURRENT:5A
RATED POWER:60W
RIPPLE & NOISE(max.):120mVp-p
VOLTAGE ADJ. RANGE:10.8 ~ 13.2V Can be adjusted by internal potential meter SVR1
VOLTAGE ADJ. RANGE:-25% ~ 3%. Can be adjusted by internal potential meter SVR2
VOLTAGE TOLERANCE:5.0%
LINE REGULATION:1.0%
LOAD REGULATION:2.0%
SETUP, RISE TIME:500ms, 30ms / 230VAC 1500ms, 30ms / 115VAC at full load
HOLD UP TIME(Typ.):50ms/230VAC 16ms/115VAC at full load
VOLTAGE RANGE:90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE:47 ~ 63Hz
EFFICIENCY (Typ.):85%
AC CURRENT (Typ.):1.2A/115VAC 0.7A/230VAC
INRUSH CURRENT(Typ.):COLD START 60A/230VAC
LEAKAGE CURRENT:0.25mA / 240VAC
OVER CURRENT:95 ~ 110%
SHORT CIRCUIT:Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE:13.8 ~ 16V
Protection type : Shut down o/p voltage, re-power on to recover
FUNCTION DIMMING CONTROL:1 ~ 10VDC .or PWM signal : 100Hz ~ 3KHz
WORKING TEMP:-20 ~ +60oC (Refer to output load derating curve)
WORKING HUMIDITY:20 ~ 90% RH non-condensing
STORAGE TEMP.,HUMIDITY:-40 ~ +80oC , 10 ~ 95% RH
TEMP. COEFFICIENT:0.03%/oC (0 ~ 50 oC)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes