Details
Liberty Pumps LE41A LE40 Pump, RED

Pumps up to 143 GPM
Maximum discharge head of 20-Foot
Oil filled, thermally protected motor
VORTEX style impeller capable of passing a 2-Inch spherical solid
Quick-disconnect 10-Foot standard power cord allows replacement of cord in seconds without breaking seals to motor
Liberty Pumps LE41A is a 115V 4/10HP Automatic/Manual Submersible Sewage/Effluent Pump with 10ft quick-disconnect power cord. This Liberty Pump is controlled by an adjustable, mercury-free, wide angle float switch. The turn-on level is approximately 12" to 16" above the bottom of the basin. The turn-off level is approximately 6" above the bottom of the basin. Other pumping differentials may be obtained by tethering the switch cord to the discharge pipe. NOTE A minimum cord length of 3.5" from the tether point to the top surface of the float is required for proper switch operation. If using a differential other than the factory setting, be sure when the pump shuts off at least 6" of fluid is left in the basin so the impeller remains submerged.The switch cord is equipped with a series (piggyback) plug, that allows for manual operation of pump separate from switch. For manual operation, or in the event of switch failure, the pump cord can be separated and plugged into the electrical outlet, directly bypassing the switch. CAUTION Do not let the pump run dry.Heavy-duty built and reliable, Liberty Pumps LE40-series is the perfect choice for residential sewage applications.Liberty Pumps LE41A have 19' Shut-off Head, 2" FNPT Discharge and a corrosion resistant VORTEX style impeller capable of passing a 2" spherical solid. The pump motor is oil filled, thermally protected. The rotor shaft is made of 416 stainless steel andis supported by lower and upper ball bearings. Quick-disconnect power cord allows replacement of cord in seconds without breaking seals to motor.