Details
1000W Battery Backup MPPT Solar Grid Tie Inverter with Limiter Sensor and Work Time Controller Function DC22-65V AC110V/220V Auto (DC22-65V, Without WiFi)


Built-in limiter function with clamp sensor, Battery discharge function support; Wifi function optional

The 22-60V type inverter will start up at 25V,and 45-90V type inverter will start up at 49.5V,after start, inverter can still work until 22v or 45v.

For 22-60V type inverter, Vmp: 30V-40V solar panel suggested Voc (solar panel) must not exceed 60V, for 45-90V type, Vmp: 50-60V solar panel suggested Voc (solar panel) must not exceed 90V

For 22-60V type, 24V battery suggested; for 45-90V type, 48V battery suggested.

If you want to use solar panel and battery at same time, you need to buy a solar charge controller(SCC). Connect solar panel and battery to SCC, inverter to battery.

Model: SUN-1000GTIL2-LCD

Output Waveform: pure sine wave

Continuous Power Output: 980W

Peak Power Output: 1000W

Input DC Voltage Range: 22-60vdc/45-90vdc

Max input DC voltage: 60v/90v

Peak power tracking voltage: 25-60v/50-90v

AC Output Voltage Range: 95-140v/185-265v

Frequency Range: 47.5-51.5 for 50hz,59.3-60.5 for 60hz

Standby Power Consumption <0.5W

Total Harmonic Distortion <5%

Max Efficiency: >92%

MPPT Efficiency:99%

Power Factor: >0.95

Over Current Protection: Yes

Over Temperature Protection: Yes

Reverse Polarity Protection: Yes

Anti-Island Protection: Yes

Stackable: Yes Just for AC output